Acrosser AR-B1047 - Manual (Page 30)

AR-B1047 User’s Guide
5-1
5. SPECIFICATIONS & SSD TYPE SUPPORTED
5.1 SPECIFICATIONS
Bus Interface: PC/104 bus
Memory Socket: Five 32-pin JEDEC sockets for SSD
One socket for DiskOnChip
Disk Capacity: EPROM – 5MB maximum
FLASH – 2.5MB maximum
SRAM – 2.5MB maximum
DOC – 72MB maximum
EPROM Type: 27C010 (128Kx8), 27C020 (256Kx8), 27C040 (512Kx8), and 27C080 (1Mx8)
FLASH Type: From 64Kx8 to 512Kx8 FLASH chips. Such as 28EEXXX, 28FXXX, 28SFXXX, 29CXXX, 29EEXXX,
and 29FXXX
SRAM Type: 128Kx8 and 512Kx8
Battery: On-board 400mAH lithium for SRAM data retention
Disk Drive: SSD – Simulates 1 or 2 floppy disk drives
DOC – Simulates 1 hard disk drive
Occupy Memory: Occupies 24K bytes (maximum) memory space
FLASH Programming: Provides 5V/12V FLASH programming circuit
Power Req.: +5V only, 0.5A maximum
PC Board: 2 layers
Dimensions: 90.2 mmX95.9mm (3.55”X3.775” Standard PC/104 form factor)
5.2 SSD TYPE SUPPORTED
The following list contains 12V FLASHs supported by the AR-B1047:
AMD
Am28F512 (64Kx8, 512K bits)
INTEL P28F512 (64Kx8, 512K bits)
SGS-THOMSON M28F512 (64Kx8, 512K bits)
AMD Am28F010 (128Kx8, 1M bits)
INTEL P28F010 (128Kx8, 1M bits)
SGS-THOMSON M28F1001 (128Kx8, 1M bits)
MXIC MX28F1000 (128Kx8, 1M bits)
AMD Am28F020 (256Kx8, 2M bits)
INTEL P28F020 (256Kx8, 2M bits)
SGS-THOMSON M28F2001 (256Kx8, 2M bits)
MXIC MX28F2000 (256Kx8, 2M bits)
The following list contains SRAMs supported by the AR-B1047:
AKM
AKM628128 (128Kx8, 1M bits)
HITACHI HM628128 (128Kx8, 1M bits)
NEC UPD431000A (128Kx8, 1M bits)
SONY CXK581000P/M (128Kx8, 1M bits)
HITACHI HM628512 (512Kx8, 4M bits)
NEC UPD434000 (512Kx8, 4M bits)
SONY CXK584000P/M (512Kx8, 4M bits)
The following list contains large page 5V FLASHs supported by the AR-B1047:
AMD
Am29F512 (64Kx8, 512K bits)
AMD Am29F010 (128Kx8, 1M bits)
AMD Am29F020 (256Kx8, 2M bits)