Acrosser AR-B1047 - Manual (Page 19)

AR-B1047 User’s Guide
3-4
(D) RFGDEMO.PGF
RFGDEMO.PGF This file provides a sample PROGRAM GROUP FILE which illustrates how to create ROM pattern
files correctly.
The PGF is an ASCII text file that can be created by using any text editor, word processor or DOS
command. The PGF lists what files will be copied and if DOS is going to be copied. This file can have any DOS
filename, but the extension name must be *.PGF. For example, followings are valid filenames.
RFGDEMO.PGF
MYRFG.PGF
MSDOS.PGF
…
An examples of the *.PGF file is as follow.
ROM_NAME=TEST1 ; ROM pattern file name is TEST1
;The output file names will be TEST1.R01,
;TEST1.R02...etc.
DOS_DRIVE=C: ; DOS system drive unit is drive C:
;If user does not want to copy DOS
;system files onto the ROM disk
;write as DOS_DRIVE=NONE
ROM_SIZE=128 ;64 means 64KX8 (28F512) EPROM
;size used
;128 means 128KX8 (27C/28F/29F010)
;EPROM size used
;256 means 512KX8 (27C/28F/29F020)
;EPROM size used
;512 means 512KX8 (27C/29F040)
;EPROM size used
;1024 means 1MX8 (27C080) EPROM
;size used
The following two files are options, which depend on whether the ROM disk is to be bootable, or not.
CONFIG.SYS
AUTOEXEC.BAT
;Below are user’s files
A:\USER1.COM ; File USER1.COM on root of drive A:
USER2.EXE ; File USER2.EXE on current directory & drive
C:\TTT\USER3.TXT ; File USER3.TXT on sub-directory TTT of drive C: