23) vertical frequency input [vfq command, 24) vertical full-line input [vln command, 25) all reset [ars command – Akai Multi Video Processor RMD-V3104U User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MVP MANUAL
(23) Vertical frequency input [VFQ command]
Input :
VFQdid2d3.d4d5d6
Explanation :• Directly changes the horizontal frequency of the model data table used for the VS board cur
rently.
• Input the frequency using 6-digit decimal numbers. When data input is omitted, the vertical fre
quency on the current model data table is displayed.
Although
numbers
outside
the
vertical
specification
range
(55.0
kHz
to
72.0
kHz)
range
of
this
board can be input, they cannot be used as preset data.
• Refer to "Using Methods of HFQ, VFQ, VLN” described later on the using methods.
(Example)
VFQ060.12^ <- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Input 60.123 kHz
(Take note to input 0 at first.)
(24) Vertical full-line input [VLN command]
Input :
VLNdid2d3
Explanation : • 3-digit decimal numbers between 000 to 999 can be input for ddd.
• Directly changes the vertical full line number of the model data table used for the VS board
currently.
• Refer to "Using Methods of HFQ, VFQ, VLN” described later on the using methods.
(25) All reset [ARS command]
Input :
ARS
Explanation : • Sets back the adjustment data, etc. memorized by the VS board to the shipment values.
• As all the data registered by the user are set back to the initial values, use this command care
fully.
172