Programmed play, To cancel random play, To cancel repeat play – Aiwa CSD-MD5 User Manual
Page 7: To repeat the desired tracks only, To select random/repeat play, 7 press prgm in stop mode, 3 repeat step 2 to program other tracks, 4 press md ►!! to start play, To check the program, To add tracks to the program
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AY
PROGRAMMED PLAY
All the tracks on the disc can be played randomly.
Press RANDOM so that RANDOM is lit up on the display.
To cancel random play
Press RANDOM to turn off RANDOM.
NOTE
During random play, you cannot skip to the previously
played track with or JOG DIAL.
When you select the track with the numbered buttons,
random play is automaticaily canceled.
Up to 16 tracks can be programmed from the inserted disc.
2
1
One track, ali the tracks or programmed tracks can be played
repeatedly.
Press REPEAT so that 1 or ^ is lit up on the display.
To repeat the current track only, select C+.
1
,
To repeat all the tracks, select
To cancel repeat play
Press REPEAT to turn off
To repeat the desired tracks only
Program the tracks and press REPEAT so that
^
is lit up.
To select random/repeat play
Press RANDOM then press REPEAT.
One track repeat (C>- 1) cannot be selected.
Use the remote control.
7
Press PRGM in stop mode.
PROG is lit up on the dispiay.
2
Press the numbered buttons 0-15 and +10 to
program a track.
Example:
To select the 25th track, press +10 twice and 5.
To seiect the 20th track, press +10 twice and 0.
Program number
Total playing time of the
selected tracks
3
Repeat step 2 to program other tracks.
4
Press MD ►!! to start play.
To check the program
Each time ►>! is pressed in stop mode, a track number and
program number wiii be displayed.
To add tracks to the program
Repeat step 2 in stop mode. The new track will be
programmed after the last track.
To clear the program
Press MD ■ in stop mode.
To change the programmed tracks
Clear the program and repeat all the steps again.
To program tracks on the main unit
1 Press PROGRAM in stop mode.
2 Turn JOG DIAL to select a track and press ENTER to
program it.
3 Press MD ►!! to start piay.
NOTE i
During programmed play, you cannot perform random play
or select a track.
If the programmed time is more than 199:59 minutes, the
dispiay shows as the total playing time.
ENGLISH
9