Aiwa CSD-MD5 - Manual (Page 18)

REGISTERING THE DISC TITLE
AND TRACK TITLE__________
BEGISTERING THE DISC TITLE
CANCEL DELETE
SPACE
7
Press MD ^11 to select MD function and insert
an MD.
2 Press TITLE in stop mode.
“Disc Title ?” is displayed for 10 seconds.
3
Within 10 seconds, press ENTER.
The unit turns into character entry mode.
4
Enter a character.
(1) Press CHARACTER repeatedly to select the kind of
character (capital letters, small letters or number/
symbols).
• Capital letters -> Small letters —j
-Numbers/symbols
-tc
B
—-
(2) Turn JOG DIAL to select a desired character.
iVnnmXm* - ,n CTi.nn * trrTXTrrcv®
KJP JAi 3D-UU
(3) Press CURSOR after you have selected a
character.
The selected character stops flashing and the flashing
moves to the right.
5 Repeat step 4 to enter all the characters (up to
50 characters).
6 Press ENTER.
When ± MD EJECT is pressed to eject a disc, TOC
EDIT is displayed and the data concerning the contents
of the editing are registered.
To cancel entering
Press CANCEL.
To change a character
Press CURSOR <- or repeatedly until the character to be
changed flashes. Then enter the desired character again.
To delete characters
Press CURSOR or -> repeatedly until the character to be
deleted flashes. Then press DELETE.
To insert a space between the characters
Press CURSOR or repeatedly until the part to be
entered as a space flashes. Then press SPACE.
These symbols can be used
NOTE
If the unit is left for one minute at steps 4 and 5, the
character entry mode is canceled.
1
8 ENGLISH