Aiwa CSD-MD5 - Manual (Page 6)

BASIC OPERATIONS
RANDOM
REPEAT
DISP
JOG DIAL
0-15, -^10
1
Press ± CD EJECT to open the disc
compartment and place a disc on the tray with
the printed side up. Then ciose the disc
compartment by pressing
± CD EJECT.
2
Press CD ^11 to start play.
& T r s c k 1
To check the remaining time
During play, press DISP repeatedly.
Each time it is pressed, the display changes cyclically.
® Elapsed playing time of the track
(2) Remaining time of the track
@ Remaining time of the disc
® TRACK is lit up on the display.
@ TRACK and REMAIN are lit up on the display.
@ TOTAL and REMAIN are lit up on the dispiay.
You cannot check the remaining time of the disc when
RANDOM or C*. 1 is lit up.
To select a track with the remote control
Press the numbered buttons 0-15 and -i-IO.
Example:
To select the 25th track, press -i-IO twice and 5.
To select the 20th track, press h -10 twice and 0.
CD play starts from the selected track and continues to the
last track.
Display information in stop mode
Total number of tracks Total playing time
NOTE
Do not use irregular shaped CDs (example: heart-shaped,
octagonal ones).
When loading an 8-cm (3-inch) disc, pull it on the inner
circle of the tray.
Do not place more than one compact disc in the disc
compartment.
Do not tilt the unit with disc loaded. Doing so may cause
malfunction.
Track number Elapsed playing time
To stop play, press ■ STOP. CD ■ on the remote control
is also available.
To pause play, press CD ►!!. To resume play, press
again.
To search for a particular point during play, keep H-4 or
►W pressed and release it at the desired point.
To skip to the beginning of a track, press or ►>!
repeatedly or turn JOG DIAL until the desired track is
displayed.
To remove the disc, press ^ CD EJECT.
To start play when the power is off
Press CD ►!!. The power is turned on and play of the
loaded disc begins.
When ^ CD EJECT is pressed, the power is also turned on.
6 ENGLISH