Adcom GTP-740 - Manual (Page 45)

6.0 CARE, MAINTENANCE, and SERVICE
CARING FOR YOUR GTP-740
Great care has been taken by ADCOM to ensure that your GTP-740 is as flawless in appearance as it is
electronically. Jhe front panel is a heavy gauge, high-grade aluminum extrusion carefully finished and anodized
for durability. The chassis, top cover, and rear panels are heavy gauge steel that have been powder-coated and
baked to ensure a lasting finish. If the front panel, top or sides become dusty or finger printed, they can be
cleaned with a soft lint free cloth, slightly dampened with a very mild detergent solution or glass cleaner.
WARNING! Do not spray or pour liquids of any kind on the GTP-740.
SERVICING
ADCOM has a Technical Service Department to answer questions pertinent to the installation and operation of
your unit. In the event of difficulty, please contact us for prompt advice. Please have the following information
readily at hand; the unit’s model and serial numbers, and dealer from which it was bought. If your problem cannot
be resolved through our combined efforts, we may refer you to an authorized repair agency, or authorize return of
the unit to our factory. To aid us in directing you to a convenient service center, it would be helpful if you indicate
which major city is accessible to your home.
Please address mail inquiries to:
ADCOM Service Corporation
10 Timber Lane
Marlboro. NJ 07746
USA
Phone, Fax or E-mail inquiries to:
Voice; 732-683-2356
Fax: 732-683-9790
Monday through Friday
9:00AM to 5;00PM EST
E-mail: [email protected]
UNDER NO CIRCUMSTANCES SHOULD YOUR UNIT BE SHIPPED TO OUR FACTORY WITHOUT PRIOR
AUTHORIZATION, OR PACKED IN OTHER THAN ITS ORIGINAL CARTON AND FILLERS.
For Fax inquires, please include a return Fax or voice number; for the reply. When calling or writing about your ,
GTP-740, be sure to note and refer to its serial number as well as the date of purchase and the dealer from whom
it was purchased. In the event the unit must be returned to our factory for service, you will be instructed on the
proper procedure when you call or write for a Return Authorization. For warranty coverage, a copy of the original
proof of purchase is required. If you have no original copy, please contact your dealer to obtain a duplicate copy.
If the original shipping carton and its fillers have been lost, discarded, or damaged, a duplicate carton may be
obtained from our Parts Department for a nominal charge.
Always ship PREPAID VIA UNITED PARCEL SERVICE (UPS) OR OTHER APPROVED CARRIER. DO NOT
SHIP VIA PARCEL POST, since the packaging was not designed to withstand rough Parcel Post handling.
FREIGHT COLLECT SHIPMENTS CAN NOT BE ACCEPTED UNDER ANY CIRCUMSTANCES.
44