Adcom GTP-740 - Manual (Page 22)

30 Source selectors (main, DVD, VCR, tuner, v. aux, CD, d. RF, d. aux.)
These buttons serve two functions.
31
First, they switch inputs on the GTP-740 so you can hear the source you’ve just selected.
Second (and even more important), they can change the functions of all the other buttons on
the remote controller. In other words, if you first push the DVD device selector, the remote's
select/play button generates a command code for your DVD player. If you then press the d.
aux device selector, the same select/play button would send a different command code that
might, for example, start your mini-disc player. (Of course, this all depends on how you
programmed the remote in the first place. Don’t worry—we’ll cover that shortly.)
Power
• In main mode (after you’ve pressed the main device selector), this is preprogrammed to turn
the GTP-740 on and off.
In tuner mode, it is also preprogrammed to turn the GTP-740 on and off.
The button is programmable for use with other sources.
32 Input selectors (tape, LO)
In main mode, these are similar to the source selectors described above but they switch only
GTP-740 inputs. They DO NOT automatically change the functions of other remote buttons.
These buttons are programmable for use with other sources.
33 Volume Up/Down
In main mode, these buttons are preprogrammed to raise and lower the GTP-740’s master
volume level accordingly.
They are programmable for use with other sources.
34 Tuning Up/Down
In tuner mode, these buttons‘are preprogrammed to scan up or down the GTP-704’s AM or
FM band.
They are programmable for use with other sources.
35
36
37
Guide
This is intended for easy call-up of cable or satellite program guides.
Button is programmable for use with any source.
Menu
In main mode, this is preprogrammed to call up the GTP-740’s SETUP menu system. (A
subsequent push will exit the menu, regardless of wrtiich menu screen you are in.)
It is programmable for use with any source.
(left arrow)
In main mode, this is preprogrammed to step through the various choices you might wish to
select while a menu item is highlighted.
In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player
The button is programmable for use with any other source.
21