Adcom GTP-740 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
38
Up arrow/Pause
•
In main mode, this is preprogrammed to scroll up to the next choice on a menu screen.
•
In CD mode, it is preprogrammed to pause an ADCOM CD player.
•
In tuner mode, it is preprogrammed to start scanning preset frequencies higher than the
current station.
•
The button is programmable for use with any other source.
39
> (right arrow)
•
In main mode, this is preprogrammed to step through the various choices you might wish to
select while a menu item is highlighted.
•
In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player
•
The button is programmable for use with any other source.
40
Down arrow/Stop
42
43
44
In main mode, this is preprogrammed to scroll down to the next choice on a menu screen.
In CD mode, it is preprogrammed to stop an ADCOM CD player.
In tuner mode, it is preprogrammed to start scanning preset frequencies lower than the
current station.
The button is programmable for use with any other source.
41
Seiect/Play
In main mode, this is preprogrammed to enter a selection chosen via the menu system.
In CD mode, it is preprogrammed to start an ADCOM CD player.
The button is programmable for use with any other source.
Direct access keypad (buttons “1” through “10,” and “+10”)
•
in tuner mode, buttons “1” through “7” are preprogrammed to access preset stations.
•
In CD mode, buttons are preprogrammed as track access commands for the ADCOM CD
player.
•
The buttons are programmable for use with any other source.
Shift
•
In tuner mode, button is preprogrammed to access presets 8 through 14 (“Shift” + “2" =
preset number 9, etc.)
•
In CD mode, button is preprogrammed as “call” command for ADCOM CD player.
•
The button Is programmable for use with any other source.
FM/AM
•
In tuner mode, button is preprogrammed to switch between FM and AM bands.
•
In CD mode, button is preprogrammed as “repeat” command for ADCOM CD player.
•
The button is programmable for use with any other source.
45
Stereo
In tuner mode, button will change playback from Stereo to Mono.
In CD mode, button is preprogrammed as “program/memory” command for ADCOM CD
player.
The button is programmable for use with any other source.
22