Self-check operation, Operations, Calling & communication – Aiphone YAZ-90-3 User Manual
Page 7: Call transfer, Communication among 3 stations, Secretary transeer (station transeer), Paging with yaw-r
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SELF-CHECK OPERATION
1. Pick up handset and dial tone is heard.
2. Press number buttons
|5] > 1X1 > [1]
>
[3
^nd , which sets your station in self-check mode.
Busy tone means your operation is void. Try again,
3. Depress and hold down either number button [T] > IXl or corresponding to communication channel desired to check.
* A continuous tone means your station is operative.
* An intermittent tone means your station is defective.
OPERATIONS
1. CALLING & COMMUNICATION
CALLING
OPERATION
MODE OF THE CALLED STATION
ACTION
1. Pick up handset.
2. Press two dial buttons of
desired station (i.e.j 1 j 0 ;for
station #10).
3. To call by voice, depress page
button in handset.
4. After communication, hang up
handset.
Talk as on the telephone after
the called station replies.
The station is communicating with
other station.
Hang up handset and call later.
H^OR Press button for setting
camp-on busy and hang up
handset (Indicator LED flashes
upon hanging up handset).
RECEIVING
Incoming call is announced by either tremolo tone or by voice. To reply, simply pick up handset.
2. CALL TRANSFER
When you transfer your call with one station to another,
1. Press [^button and the station number to which you are transferring the call.
When the station replies, hang up handset.
OR
2. Press @ button and the station number, intermittent tone means the transfer is completed and you may hang up handset.
3. COMMUNICATION AMONG 3 STATIONS
When you wish to have the third station join the conversation being held, press QL button and the third station number
(If your call to a third station is not picked up in 15 seconds, it will automatically return to the initial communication bet
ween the first two stations).
4. SECRETARY TRANSEER (STATION TRANSEER)
When you wish any of incoming calls to be received by your secretary or other designated station,
1. Pick up handset,
2. Press button and the two dial buttons of secretary station.
3. Hang up handset.
4. Indicator LED on your station starts to flash when you hang up handset.
* To clear Secretary (Station) Transfer mode;
Press and buttons at your station.
5. PAGING WITH YAW-R
1. Pick up handset.
2. Press Q-:J button.
3. Press a dial button (0 — 9) of YAW-R number assigned (No. )
4. Page while depressing page button in handset.
5. Release page button in handset to listen, when talkback is included.
6. Hang up handset.
-
7
-