A&D GR Series GR-300 - Manual (Page 70)

pecificatio
ifciiB I !>>; iiAiM ii liiiiiWiwianiWiitfi»Mii inmndliriii' I t iirm ~itiiiji*fB««riSATtniiii i!iw'irtii~i
GR-120 GR-200 GR-300 GR-202
Weighing capacity 120 g 210 g 310 g 210 g/42 g
Min. weighing value (1 digit) 0.1 mg 0.1 mg 0.1 mg 0,1 mg/0.01 mg
Repeatability (Standard deviation) 0.1 mg 0.1 mg 0.2 mg 0.1 mg/0.02 mg
Linearity 1D.2 mg £).2 mg 10.3 mg 10.2 mg/10.03 mg
Stabilization time (approx.) 3.5 sec 3.5 sec 3.5 sec 3.5 sec/8 sec
Sensitivity drift (10°C ~ 30°C)
Ambient temperature
12 ppm/°C (Automatic Self Calibration is not used)
5°C ~ 40°C (41 °F ~ 104°F),
RH < 85% (Do not allow condensation)
Min. unit weight 0.1 mg
Min. 100% weight 0.01 g
Interface RS-232C
Calibration weight Built-in weight
External calibration weight 100 g 200 g 200 g 200 g
50 g 100 g 300 g 100 g
Weighing pan 085 mm
Weiging room 178(W)x 160(D) X 233(H) mm
External dimension 249(W) X 330(D) X 327(H) mm
Power consumption Approx. 11VA (supplied to AC adapter)
AC adapter, Power supply Please confirm that the AC adapter is correct for your receptacle type anc
voltage [factory preset].
Net weight Approx. 6.0 kg
d)85
I
U
/...... \ i
327
Maintenance
330
page 69 18. Specifications