Operation of unit selection – A&D GR Series GR-300 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of unit selection
The unit can be selected in the function table. The sequence of displaying
the unit can be arranged so as to fit the frequency of use in the function
table. According to the sequence of displaying unit, the units can be
changed with the [MODE key at the weighing mode.
Selecting a unit and arranging the sequence of display
of the function table.
Step 1 Press and hold the RANGE key to display
/
i i r r -
Lf ‘ I J I n L
Step 2 Press the [RANGE key several times to display \Un it
Step 3 Press the [PRINT key to enter into unit selection.
Step 4 The unit can be selected using the following keys.
The unit display sequence is in the order of pressing the | RE-ZERO key.
MODE I key
The key to sequentially display the units.
RE-ZERO I key The key to select a unit. The jO | indicator is
displayed at unit selected.
Step 5 Press the PRINT key to store the units. Then the balance displays next
menu id of the function table.
Step 6 Press the |CAL| key to exit the function table. Then the balance returns
to the weighing mode.
4. Weighing Units
Page 12
Basic operation