Selecting the unit of percent nnode, Storing 100% weight, Reading percentage – A&D GR Series GR-300 User Manual
Page 16: Percent mode (%)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Percent Mode (%)
Selecting the unit of percent nnode
Step 1 Select the unit % using the MODE key. If the percent mode can not be
selected, refer to section "4. Weighing Units". ( % : percent)
Storing 100% weight
Step 2 Press the | RANGE key to enter the sampling mode.
Step 3 Place a container on the weighing pan, if necessary.
Press the | RE-ZERO | key to cancel the container weight and possible
error. The balance displays I//7/7 B%
Step 4 Place the item of 100% weight on the pan or in the container.
Step 5 Press the [PRINT key to store this 100% weight.
Step 6 Remove the item from the pan.
Reading percentage
Step 7 You are now able to read the percentage based on the stored 100%
weight.
Basic operation
page 15
5. Weighing