A&D GR Series GR-300 - Manual (Page 47)

11. Data Me
:fl| Use and The Method of Storing Da
□ The data memory function can store 200 sets of weighing data. If the power
switch is turned off, AC power is interrupted or the AC adapter is removed,
the data is maintained in non-volatile memory.
□ It is not necessary that the printer or computer be continually connected to
the balance, because the balance stores the weight data in memory.
□ There are four types of operating modes to store the data.
Key Mode
Auto-Print Mode A
When you press the ¡PRINT key and the display value
is stable, the balance stores the weighing data.
When the display value is stable and meets the
conditions of "Auto-print polarity", "Auto-print band"
and standard value (of zero point), the balance stores
the weighing data.
When the display value is stable and meets the
conditions of "Auto-print polarity", "Auto-print band"
and standard value (of last stable value), the balance
stores the weighing data.
Intewal Memop/ Mode Weighing data is periodically stored in the balance.
Auto-Print Mode B
This mode can be started or stoped using the PRINT
key .
□ The data number can be appended just before the weighing data. (This is
the serial number of the data in memory.)
Symbols
The amount of
data in memory
Full memory —
Current data number
w
nnn
~ ^ u u u
> < //
^ cn»
l U L
\ w
Display of
weighing
uuu
/ i \ \
Display of data
in memory
Interval memory mode
Standby indicator
■ Interval memory mode
Operation indicator
11, Data Memory Function Page 46 Functions