Basic connections, To use the security hook for safety (vx-s205 only), Connecting the antenna – Aiwa VX-S135U User Manual
Page 5: Basic connections 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the antenna
Basic connections
1
Connect the antenna cable to the UHF/VHF connector on the unit.
If the cable Is a round-type 75-ohm coaxial cable, connect It directly to the UHFA/HF connector.
If the cable Is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor(supplled), and connect the adaptor to
the UFIF/VHF connector.
When you use VX-Sf 35U, the antenna adaptor can be taken out from the supplied telescopic antenna.
2
Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.
To use the security hook for safety (VX-S205 only)
To prevent the unit from falling during earthquakes, etc., affix the unit to a wall or pillar with the security hook on the rear using
the strong twine or wire.
VX-S205
Security hook
CONTINUE
ENGLISH