Before starting, Press channel repeatedly or the, Press • rec/otr to start recording – Aiwa VX-S135U User Manual
Page 24: To stop recording, To pause recording, To prevent an accidentai recording, Recording a tv program
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a TV program
TVVCR/CATV
TV/LINE
■ CHANNEL^/\/
• REC/OTR
-IIPAUSE/STILL
I STOP
Before starting
Set the TV VCR/CATV selector to TV VCR.
1 Insert a cassette with its erasure prevention tab
in place.
The power turns on automatically.
VX-S135
2
Press TAPE SPEED to select the tape speed,
SP, LP or SLP.
SLR provides three as much recording time as SP, LP
provides twice as much recording time as SP, although
SP produces better picture and audio sounds.
4
Press CHANNEL
repeatedly or the
number buttons to select the channel number
to record.
To select CATV broadcast using the number buttons
When selecting the number between 10 and 19, press 0
once to enter the hundreds digit, and then press the
buttons 1 through 9 to enter tens and ones digits. When
selecting the numbers less than 10, press 0 twice to
enter the hundreds and tens digits, and then press the
buttons 1 through 9 to enter the ones digit.
To select VHF/UHF broadcast using the number buttons
When selecting the numbers iess than 10, press 0 to
enter the tens digits, and then press the buttons 1
through 9 to enter the ones digit.
Press • REC/OTR to start recording.
• “INDEX” flashes for a few seconds. See page 19.
• The REC/OTR indicator on the unit lights.
To stop recording
Press ■ STOP on the remote control or
M/é.
STOP/
EJECT on the unit.
To pause recording
Press
I I
PAUSE/STILL. The REC/OTR indicator on the unit
flashes.
To resume recording, press
I I
PAUSE/STILL or #REC/
OTR.
To prevent an accidentai recording
Break off the erasure prevention tab on the back edge of the
cassette.
To record over the tape again, cover the gap with adhesive
tape.
Adhesive tape
Tip
If you want to record the program through the line input, press
CHANNEL xX/N/ or TV/LINE to display “LINE1 ” (from the
AUDIO/VIDEO IN jacks on the rear) or “LINE2" (from the
AUDIO/VIDEO IN jacks on the front) in step 3.
• The channel cannot be changed during recording.
• If you try to record on a cassette without its erasure
prevention tab, the unit will eject the cassette.
• If recording pause lasts for more than 5 minutes, the unit will
automatically enter stop mode to protect the tape.
• If the power is turned off during recording, the TV turns off,
but the VCR continues to record.
23
ENGLISH