Before starting, 1 press menu, 6 press set/tracking +/- to set the minutes – Aiwa VX-S135U User Manual
Page 10: 7 press enter to start the clock, To correct the digits whiie setting, Selling the auto clock, Press menu, Setting the clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the clock
You must set the date and time for timer recording.
When you connect the AC cord to the AC wall outlet, the
date and time will be set automatically If the unit receives
the clock adjustment signal. If the unit cannot receive the
clock adjustment signal or reception signal is weak, the unit
may set the clock incorrectly. In this case, you must set the
time manually.
MENU
SET/TRACKING
+/-
TV VCR/CATV
ENTER
CANCEL
Before starting
Set the TV VCR/CATV selector to TV VCR.
1
Press MENU.
If the clock is not set, SYSTEM SET-UP menu in step 3
appears.
2
Press SET/TRACKING +/- to select SYSTEM
SET-UP, then press ENTER.
M E N U
■ TIMER REC SET
■ TV SET-UP
i CH SET-UP
■ AUTO REPEAT ON ►OFF
-SYSTEM SET-UP
<+/-/ENTER/MENU>
3
Press SET/TRACKING +/- to select CLOCK
SET, then press ENTER.
. ISYSTEM SET-UP
■ SLOCK SET
itANGUAGE/IDIOMA/LANGUE
■ AUTO CLOCK ►ON OFF
■ STANDARD TIME
■ DAYLIGHT SAVING TIME
<+/-/ENTER/MENU>
4
Press SET/TRACKING +/- to set MONTH, then
press ENTER.
The day of the week will automatically appear.
CLOCK SET
DAY ^ÌÌTHU)
YEAR 2000
TIME 12:00AM
<+/-/ENTER/CANCEL/MENU>
Set DAY, YEAR and hours in the same way as
in step 4.
Press and hold SET/TRACKING+/- to change the
setting rapidly.
CLOCK SET
MONTH
DAY
YEAR
TIME •
20(SUN)
mi...
<+/-/ENTER/CANCEL/MENU>
6 Press SET/TRACKING +/- to set the minutes.
Press and hold SET/TRACKING-i-/- to change the
setting rapidly.
CLOCK SET
MONTH
6
DAY
20(SUN)
YEAR
TIME
18=:3@AM
/|\
<-i-/-/ENTER/CANCEL/MENU>
7
Press ENTER to start the clock.
The normal screen returns.
To correct the digits whiie setting
Before pressing ENTER in step 7, press CANCEL
repeatedly until the item you want to correct
flashes. Reset the digits using SET/TRACKING
+!-
Tip
When the power supply is interrupted for more than 5 seconds,
the clock setting is cleared. In this case, you have to set the
clock again.
The date can be set from A.D.1990 to A.D. 2081.
Selling the Auto Clock
The unit automatically corrects the clock setting once you
set AUTO CLOCK to ON. After unpacking the unit, AUTO
CLOCK is setto ON.
If AUTO CLOCK is set to OFF, follow the procedures below.
1
2
Press MENU.
Press SET/TRACKING+/- to select SYSTEM SET-UP,
then press ENTER.
M E N U
■ TIMER REC SET
■ TV SET-UP
i CH SET-UP
(AUTO REPEAT ON »-OFF
■ SYSTEM SET-UP
<+/-/ENTER/MENU>
9
ENGLISH