To stop recording, To extend the recording duration while recording, Setting the timer with vcr plus+ system – Aiwa VX-S135U User Manual
Page 26: Before starting, 1 press vcr plus, Setting the timer with vcr plus-i- system, Vcr plus+ system, Setting the timer with
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To stop recording
Press ■ STOP on the remote control or ■/£ STOP/
EJECT on the unit.
To extend the recording duration while
recording
Press • REC/OTR until the new duration you want appears
on the screen.
hp
To confirm the remaining time of recording, press • REC/OTR
once during One-Touch Recording.
Recording with One-Touch Recording (continued)
If the power is turned off during One-Touch Recording, the
TV turns off, but the VCR continues to record.
During One-Touch Recording, when the tape reaches the
end, the TIMER REC indicator on the unit flashes.
Setting the timer with
VCR
Plus+ system__________
You can greatly simplify timer recordings with VCR PI
us
-
h
system. Just enter the VCR Plus-i- programming number, a
number assigned to each TV program, and the unit will set
the timer recording automatically. You can find VCR PI
us
-
h
programming number in most TV guide magazines.
You can set up to 8 programs.
TVVCR/CATV
number buttons
T-REC
- ENTER
CANCEL
Before starting
• Check that the clock is set correctly.
• Check that the channel numbers match the guide channels
which assigned to the TV stations. See page 12.
• Insert a cassette with its erasure prevention tab in place.
• Set the TV VCR/CATV selector to TV VCR.
•If the CATV converter is used for the timer recording, check
that the CATV converter is turned on and the channel you
want to record is selected.
1
Press VCR PLUS+.
2
Enter the VCR Plus+ programming number of
the TV program you want to record using the
number buttons.
If you make a mistake, press CANCEL.
PLUSCODE 1 2»*- —
/'I’v
DAILY
W E E K L Y
<0-9/+/-/ENTER/PROGRAM>
25
ENGLISH