1 press menu, Press enter to select tv or catv, 5 press menu twice to return to the nomal screen – Aiwa VX-S135U User Manual
Page 12: Adding or erasing the channels manually, 5 press enter to erase or add a selected channel, Setting the channels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the channels
Before Auto Channel Memory, this unit can receive all
channels in your area by pressing CHANNEL y\/\/
repeatedly. After Auto Channel Memory, you can skip the
channels which are not preset with CHANNEL
TV VCR/CATV
-ENTER
Make sure the unit is in TV mode.
' Set the TV VCR/CATV selector to TV VCR.
1
Press MENU.
2
Press SET/TRACKING +/- to select CH SET
UP, then press ENTER.
M E N U
■ TIMER REC SET
..•7V SET-UP
SET-UP
r* AUTO REPEAT ON ►OFF
■ SYSTEM SET-UP
<-b/-/ENTER/MENU>
Press ENTER to select TV or CATV.
TV :
the program from VHF/UHF antenna
CATV ; the CATV according to the connections to the
antenna connector
IpH SET-UP
■ -TV ►CATV
•'i AUTO CH MEMORY
i ADD/DELETE
■ GUIDE CH SET
<+/-/ENTER/MENU>
4
Press SET/TRACKING +/- to select AUTO CH
MEMORY, then press ENTER.
All available channels in your area are scanned and
stored in the memory of the unit.
After scanning, CH SET-UP menu appears on the
screen.
1
1
ENGLISH
5
Press MENU twice to return to the nomal
screen.
To interrupt the Auto Channel Memory, press MENU.
Once you conduct the Auto Channel Memory, the previous
settings will be canceled.
Adding or erasing the channels
manually
If the Auto Channel Memory does not set the channels
correctly, add them manually for watching TV programs.
Also, you can erase the unnecessary channels.
1
Press MENU.
2
Press SET/TRACKING +/- to select CH SET-UP, then
press ENTER.
M E N U
■ TIMER REC SET
■ TV SET-UP
' ^■■feH SET-UP
^i>UTO REPEAT ON POFF
I SYSTEM SET-UP
<+/-/ENTER/MENU>
3
Press SET/TRACKING +/- to select ADD/DELETE,
then press ENTER.
CH SET-UP
1
TV ►CATV
• AUTO CH MEMORY
¡•.ADD/DELETE
•
guide
CH SET
<+/-/ENTER/MENU>
Press SET/TRACKING +/- to select the channel
number to be erased or added.
When the selected channel is already set, ADD appears
in green. When it is not set, DEL appears in red.
<0-9/ + /-/ENTER/MENU>
5
Press ENTER to erase or add a selected channel.
6 If you want to add or erase another channel, repeat
steps 4 and 5.
7
Press MENU 3 times to return to the normal screen.