Aiwa XR-MD95 User Manual
Aiwa Acoustics
Table of contents
Document Outline
- WARNING
- PRECAUTIONS
- TABLE OF CONTENTS
- CONNECTIONS
- Before connecting the AC cord
- IMPORTANT
- 1 Place the CD player/MD recorder unit on top of the tuner/amplifier unit and plug in the connector of the flat cable as shown below.
- 2 Connect the speaker cords to the tuner/amplifier unit.
- 3 Connect the supplied antennas.
- 4 Connect the AC cord to an AC outlet.
- PLACING THE TWO UNITS SIDE BY SIDE
- CONNECTING AN OUTDOOR ANTENNA
- BEFORE OPERATION
- SETTING THE CLOCK
- When to use the remote control
- To use the SHIFT button
- 1 Press the POWER button to turn on the power.
- 2 Press the CLOCK button while pressing the SHIFT button on the remote control.
- 3 Within 4 seconds, press the II button.
- 4 Press the ◄◄ or hour.
- 5 Press the II button to set the hour.
- 6 Press the ◄◄ or ►► button to designate the minute.
- 7 Press the II button to set the minute and complete the setting.
- ADJUSTING THE SOUND
- I
- MANUAL TUNING
- PRESETTING STATIONS
- OPERATION
- LOADING A DISC
- PLAYING A DISC
- RANDOM PLAY
- REPEAT PLAY
- PROGRAMMED PLAY
- TYPES OF MDS
- Optical discs
- Recordable MO*^ discs
- Ultra compact size made possible by ATRAC*^ technology
- Quick random access
- "TOC Full" is displayed even if a disc Is not fully recorded on.
- The remaining time on a disc is not increased even after some short tracks have been erased.
- Tracks cannot be joined (the COMBINE function does not function).
- Track numbers may not be registered properly.
- Digital inputs may not be acceptable.
- INSERTING AN MD
- PLAYING AN MD
- PROGRAMMED PLAY
- RANDOM PLAY
- REPEAT PLAY
- VARIOUS WAYS OF MD RECOROING
- ABOUT THE INDEX MARK
- RECORDING A WHOLE CD
- RECORDING ONLY ONE TRACK OPACO
- To stop recording before the end of the track
- To record on a previously recorded MD
- To change the display during recording
- 1 Load a recordable MD into the disc drive with the label side up and in the direction of the arrow.
- 2 Press the CD button on the control panel.
- 3 Load the CD to be recorded.
- 4 Play back the track to record.
- 5 Press the CD ► MD button to start recording.
- PROGRAMMED RECORDING OF A CD
- 1 Load a recordable MD into the disc drive with the iabei side up and in the direction of the arrow.
- 2 Press the CD button on the control panel.
- 3 Load the CD to be recorded.
- 4 Press the PRGM button while pressing the SHIFT button on the remote control.
- 5 Press the numbered button and the +10 button to program a track to record.
- 6 Repeat step 5 to program other tracks.
- 7 Press the CD ► MD button to start recording.
- RECORDING FROM THE RADIO, A CD OR CONNECTED EQUIPMENT
- 1 Load a recordable MD into the disc drive with the
- label side up and in the direction of the arrow.
- 2 Press one of the function buttons on the control
- panel and prepare the source to be recorded.
- 3 Press the MD MODE button.
- 4 Within 4 seconds, press the ENTER button.
- 5 Within 4 seconds, turn the VOL/MULTI JOG dial to select an index mark mode.
- 6 Within 4 seconds, press the ENTER button.
- 7 Press the MD REC button.
- 8 Press the II button to start recording.
- EXTENDED (MONAURAL) RECORDING
- 1 Load a recordable MD into the disc drive with the
- iabel side up and in the direction of the arrow.
- 2 Press one of the function buttons on the controi
- panei and prepare the source to be recorded.
- 3 Press the MD MODE button twice.
- 8 Within 4 seconds, press the ENTER button.
- 9 Within 4 seconds, turn the VOL/MULTi JOG dial to seiect an index mark mode.
- 10 Within 4 seconds, press the ENTER button.
- 11 Press the MD REC button.
- ¿5-i/
- REGISTERING THE DISC TITLE AND TRACK TITLE
- DIVIDING A TRACK
- ERASING TRACKS
- TIMER PLAY AND TIMER RECORDING
- CONNECTING OPTIONAL EQUIPMENT
- LISTENING TO EXTERNAL SOURCES
- CARE AND MAINTENANCE
- SPECIFICATIONS
- TROUBLESHOOTING GUIDE
- PARTS INDEX
- PRECAUCIONES
- INDICE
- CONEXIONES
- ANTES DE LA OPERACION
- AJUSTE DEL RELOJ
- AJUSTE DEL SONIDO
- SINTONIZACION MANUAL
- OPERACIÓN
- ¿QUÉ ES UN MD (MINIDISCO)?
- OPERACION
- VARIAS FORMAS DE GRABACION DE MINIDISCO
- MARCAS INDICATORIAS
- GRABACION DE TODO UN CD
- GRABACION DE UNA SOLA PISTA DE UN CD
- GRABACIÓN PROGRAMADA DE UN CD
- GRABACIÓN DESDE LA RADIO, UN CD O EQUIPO CONECTADO
- GRABACIÓN EXTENDIDA (MONOAURAL)
- REGISTRO DEL TITULO DEL DISCO Y TÍTULO DE LA PISTA
- DIVISION DE UNA PISTA
- Ejemplo
- 1 Apriete el botón MD y cargue un minidisco
- 2 Durante la reproducción, apriete el botón II en el punto en el cual desee dividir una pista.
- 3 Apriete el botón MD EDIT para que se visualice "Divide" en pantalla.
- 4 Antes de que transcurran 10 segundos, apriete el botón ENTER.
- 5 Extraiga el minidisco de la unidad.
- COMBINACION DE DOS PISTAS
- CAMBIO DEL ORDEN DE LAS PISTAS
- ELIMINACION DE PISTAS
- REPRODUCCION Y GRABACION CON TEMPORIZADOR
- CONFIGURACION DEL TEMPORIZADOR DE APAGADO
- CDNEXIDN DE EQUIPD DPCIDNAL
- ESCUCHAR FUENTES EXTERNAS CUIDADOS Y MANTENIMIENTO
- MENSAJES INDICADORES DEL MINIDISCO
- SOLUCIÓN A PEQUEÑOS PROBLEMAS
- INDICE DE LAS PARTES
- PRECAUTIONS
- TABLE DES MATIÈRES
- CONNEXIONS
- AVANT L’UTILISATION
- REGLAGE DE L’HORLOGE
- REGLAGE DU SON
- ACCORD MANUEL
- QU’EST-CE QU’UN MINIDISQUE (MD)?
- TYPE DE MINIDISQUES
- LIMITATIONS D’UN MINIDISQUE
- “TOC Full” peut être affiché même si un disque n’est pas complètement enregistré.
- Le temps restant d’un disque ne peut pas augmenter même après l’effacement de certaines plages courtes.
- La jonction de plages (fonction COMBINE) n’est pas toujours possible.
- L’enregistrement de numéros de plages peut ne pas se faire correctement.
- Les entrées numériques peuvent ne pas fonctionner.
- MISE EN PLACE D’UN MINIDISQUE
- LECTURE D’UN MINIDISQUE
- LECTURE ALEATOIRE
- LECTURE REPETEE
- LECTURE PROGRAMMEE
- PLUSIEURS FAÇONS D’ENREGISTRER UN MINIDISQUE
- AU SUJET DES CODES D’INDEX
- FONCTION AUTO MARK
- FONCTION TIME MARK
- FONCTION TIME MARK
- ENREGISTREMENT D’UNE PLAGE DÉSIRÉE
- 1 Insérez un minidisque enregistrabie dans l’appareil avec le côté portant l’étiquette tourné vers le haut et dans le sens de la flèche.
- 2 Appuyez sur la touche CD sur le panneau de contrôle.
- 3 Insérez le disque compact à enregistrer.
- 4 Procédez à la lecture de la plage à enregistrer.
- 5 Appuyez sur la touche CD commencer l’enregistrement.
- ENREGISTREMENT DE LA RADIO, D’UN DISQUE COMPACT OU D’UN APPAREIL CONNECTÉ
- ENREGISTREMENT DOUBLE DURÉE (MONOPHONIQUE)
- ENREGISTREMENT DE TITRES DE DISQUE ET DE PLAGE
- DIVISION D’UNE PLAGE
- 1 Appuyez sur la touche MD sur le panneau de contrôle et insérez un minidisque.
- 2 Lors de la lecture, appuyez sur la touche II à l’endroit où vous souhaitez diviser la plage.
- 3 Appuyez sur la touche MD EDIT afin que “Divide” s’affiche.
- 4 Avant de laisser passer 10 secondes, appuyez sur la touche ENTER.
- 5 Retirez le minidisque de l’appareil.
- COMBINAISON DE DEUX PLAGES
- CHANGEMENT DE L’ORDRE DES PLAGES
- EFFACEMENT DE PLAGES
- LECTURE ET ENREGISTREMENT PAR LA MINUTERIE
- REGLAGE DE LA MINUTERIE DE SOMMEIL
- CONNEXION D’UN APPAREIL OPTIONNEL
- J