Aiwa XR-MD95 User Manual
Aiwa Acoustics
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- WARNING
- PRECAUTIONS
- TABLE OF CONTENTS
- CONNECTIONS
- Before connecting the AC cord
- IMPORTANT
- 1 Place the CD player/MD recorder unit on top of the tuner/amplifier unit and plug in the connector of the flat cable as shown below.
- 2 Connect the speaker cords to the tuner/amplifier unit.
- 3 Connect the supplied antennas.
- 4 Connect the AC cord to an AC outlet.
- PLACING THE TWO UNITS SIDE BY SIDE
- CONNECTING AN OUTDOOR ANTENNA
- BEFORE OPERATION
- SETTING THE CLOCK
- When to use the remote control
- To use the SHIFT button
- 1 Press the POWER button to turn on the power.
- 2 Press the CLOCK button while pressing the SHIFT button on the remote control.
- 3 Within 4 seconds, press the II button.
- 4 Press the ◄◄ or hour.
- 5 Press the II button to set the hour.
- 6 Press the ◄◄ or ►► button to designate the minute.
- 7 Press the II button to set the minute and complete the setting.
- ADJUSTING THE SOUND
- I
- MANUAL TUNING
- PRESETTING STATIONS
- OPERATION
- LOADING A DISC
- PLAYING A DISC
- RANDOM PLAY
- REPEAT PLAY
- PROGRAMMED PLAY
- TYPES OF MDS
- Optical discs
- Recordable MO*^ discs
- Ultra compact size made possible by ATRAC*^ technology
- Quick random access
- "TOC Full" is displayed even if a disc Is not fully recorded on.
- The remaining time on a disc is not increased even after some short tracks have been erased.
- Tracks cannot be joined (the COMBINE function does not function).
- Track numbers may not be registered properly.
- Digital inputs may not be acceptable.
- INSERTING AN MD
- PLAYING AN MD
- PROGRAMMED PLAY
- RANDOM PLAY
- REPEAT PLAY
- VARIOUS WAYS OF MD RECOROING
- ABOUT THE INDEX MARK
- RECORDING A WHOLE CD
- RECORDING ONLY ONE TRACK OPACO
- To stop recording before the end of the track
- To record on a previously recorded MD
- To change the display during recording
- 1 Load a recordable MD into the disc drive with the label side up and in the direction of the arrow.
- 2 Press the CD button on the control panel.
- 3 Load the CD to be recorded.
- 4 Play back the track to record.
- 5 Press the CD ► MD button to start recording.
- PROGRAMMED RECORDING OF A CD
- 1 Load a recordable MD into the disc drive with the iabei side up and in the direction of the arrow.
- 2 Press the CD button on the control panel.
- 3 Load the CD to be recorded.
- 4 Press the PRGM button while pressing the SHIFT button on the remote control.
- 5 Press the numbered button and the +10 button to program a track to record.
- 6 Repeat step 5 to program other tracks.
- 7 Press the CD ► MD button to start recording.
- RECORDING FROM THE RADIO, A CD OR CONNECTED EQUIPMENT
- 1 Load a recordable MD into the disc drive with the
- label side up and in the direction of the arrow.
- 2 Press one of the function buttons on the control
- panel and prepare the source to be recorded.
- 3 Press the MD MODE button.
- 4 Within 4 seconds, press the ENTER button.
- 5 Within 4 seconds, turn the VOL/MULTI JOG dial to select an index mark mode.
- 6 Within 4 seconds, press the ENTER button.
- 7 Press the MD REC button.
- 8 Press the II button to start recording.
- EXTENDED (MONAURAL) RECORDING
- 1 Load a recordable MD into the disc drive with the
- iabel side up and in the direction of the arrow.
- 2 Press one of the function buttons on the controi
- panei and prepare the source to be recorded.
- 3 Press the MD MODE button twice.
- 8 Within 4 seconds, press the ENTER button.
- 9 Within 4 seconds, turn the VOL/MULTi JOG dial to seiect an index mark mode.
- 10 Within 4 seconds, press the ENTER button.
- 11 Press the MD REC button.
- ¿5-i/
- REGISTERING THE DISC TITLE AND TRACK TITLE
- DIVIDING A TRACK
- ERASING TRACKS
- TIMER PLAY AND TIMER RECORDING
- CONNECTING OPTIONAL EQUIPMENT
- LISTENING TO EXTERNAL SOURCES
- CARE AND MAINTENANCE
- SPECIFICATIONS
- TROUBLESHOOTING GUIDE
- PARTS INDEX
- PRECAUCIONES
- INDICE
- CONEXIONES
- ANTES DE LA OPERACION
- AJUSTE DEL RELOJ
- AJUSTE DEL SONIDO
- SINTONIZACION MANUAL
- OPERACIÓN
- ¿QUÉ ES UN MD (MINIDISCO)?
- OPERACION
- VARIAS FORMAS DE GRABACION DE MINIDISCO
- MARCAS INDICATORIAS
- GRABACION DE TODO UN CD
- GRABACION DE UNA SOLA PISTA DE UN CD
- GRABACIÓN PROGRAMADA DE UN CD
- GRABACIÓN DESDE LA RADIO, UN CD O EQUIPO CONECTADO
- GRABACIÓN EXTENDIDA (MONOAURAL)
- REGISTRO DEL TITULO DEL DISCO Y TÍTULO DE LA PISTA
- DIVISION DE UNA PISTA
- Ejemplo
- 1 Apriete el botón MD y cargue un minidisco
- 2 Durante la reproducción, apriete el botón II en el punto en el cual desee dividir una pista.
- 3 Apriete el botón MD EDIT para que se visualice "Divide" en pantalla.
- 4 Antes de que transcurran 10 segundos, apriete el botón ENTER.
- 5 Extraiga el minidisco de la unidad.
- COMBINACION DE DOS PISTAS
- CAMBIO DEL ORDEN DE LAS PISTAS
- ELIMINACION DE PISTAS
- REPRODUCCION Y GRABACION CON TEMPORIZADOR
- CONFIGURACION DEL TEMPORIZADOR DE APAGADO
- CDNEXIDN DE EQUIPD DPCIDNAL
- ESCUCHAR FUENTES EXTERNAS CUIDADOS Y MANTENIMIENTO
- MENSAJES INDICADORES DEL MINIDISCO
- SOLUCIÓN A PEQUEÑOS PROBLEMAS
- INDICE DE LAS PARTES
- PRECAUTIONS
- TABLE DES MATIÈRES
- CONNEXIONS
- AVANT L’UTILISATION
- REGLAGE DE L’HORLOGE
- REGLAGE DU SON
- ACCORD MANUEL
- QU’EST-CE QU’UN MINIDISQUE (MD)?
- TYPE DE MINIDISQUES
- LIMITATIONS D’UN MINIDISQUE
- “TOC Full” peut être affiché même si un disque n’est pas complètement enregistré.
- Le temps restant d’un disque ne peut pas augmenter même après l’effacement de certaines plages courtes.
- La jonction de plages (fonction COMBINE) n’est pas toujours possible.
- L’enregistrement de numéros de plages peut ne pas se faire correctement.
- Les entrées numériques peuvent ne pas fonctionner.
- MISE EN PLACE D’UN MINIDISQUE
- LECTURE D’UN MINIDISQUE
- LECTURE ALEATOIRE
- LECTURE REPETEE
- LECTURE PROGRAMMEE
- PLUSIEURS FAÇONS D’ENREGISTRER UN MINIDISQUE
- AU SUJET DES CODES D’INDEX
- FONCTION AUTO MARK
- FONCTION TIME MARK
- FONCTION TIME MARK
- ENREGISTREMENT D’UNE PLAGE DÉSIRÉE
- 1 Insérez un minidisque enregistrabie dans l’appareil avec le côté portant l’étiquette tourné vers le haut et dans le sens de la flèche.
- 2 Appuyez sur la touche CD sur le panneau de contrôle.
- 3 Insérez le disque compact à enregistrer.
- 4 Procédez à la lecture de la plage à enregistrer.
- 5 Appuyez sur la touche CD commencer l’enregistrement.
- ENREGISTREMENT DE LA RADIO, D’UN DISQUE COMPACT OU D’UN APPAREIL CONNECTÉ
- ENREGISTREMENT DOUBLE DURÉE (MONOPHONIQUE)
- ENREGISTREMENT DE TITRES DE DISQUE ET DE PLAGE
- DIVISION D’UNE PLAGE
- 1 Appuyez sur la touche MD sur le panneau de contrôle et insérez un minidisque.
- 2 Lors de la lecture, appuyez sur la touche II à l’endroit où vous souhaitez diviser la plage.
- 3 Appuyez sur la touche MD EDIT afin que “Divide” s’affiche.
- 4 Avant de laisser passer 10 secondes, appuyez sur la touche ENTER.
- 5 Retirez le minidisque de l’appareil.
- COMBINAISON DE DEUX PLAGES
- CHANGEMENT DE L’ORDRE DES PLAGES
- EFFACEMENT DE PLAGES
- LECTURE ET ENREGISTREMENT PAR LA MINUTERIE
- REGLAGE DE LA MINUTERIE DE SOMMEIL
- CONNEXION D’UN APPAREIL OPTIONNEL
- J