Aiwa XR-MD95 - Manual (Page 24)

COMBINING TWO TRACKS
You can combine two tracks by erasing the index mark in
between.
Example
To combine the 2nd track and the 3rd track by erasing the index
mark at the beginning of the 3rd track:
1st track 2nd track 3rd track
NOTE
' if both of the tracks are titied, the titie of the iower numbered
track remains, if only one track is titled on the tracks to be
combined, this titie remains.
' You cannot combine a track recorded in monaurai and a track
recorded in stereo.
1 St track 2nd track
MD EDIT
ENTER
MD
1 Press the MD button on the control panel and
load an MD.
2 Select or play back the latter track of the two
tracks to be combined using the ◄◄ or ►►
button or the numbered buttons on the remote
control.
Example:
To combine the 2nd and 3rd tracks, select or play back the
3rd track.
3 Press the MD EDIT button repeatedly so that
"Combine" is dispiayed.
Example:
When combining the 2nd and 3rd tracks
r.r
4 Within 10 seconds, press the ENTER button.
The two tracks are combined.
The track numbers from this point forward are decreased by
1
.
5 Remove the MD from the unit.
"TOC Edit" is displayed and the data concerning the contents
of the editing are registered.
24
ENGLISH