Md guide messages – Aiwa XR-MD95 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MD GUIDE MESSAGES
Message
Cause
Solution
Blank Disc
Nothing is recorded on the disc.
—
Can't Edit
Tracks are too short to be joined up.
See “THE LIMITATIONS OF MINI DISC” on page 13.
The combine function was used while playing
back the first track.
Disabled.
The divide function is used at the beginning of the
track.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo.
Disc Error
The disc is damaged by scratches.
Replace the disc.
The unit received a strong shock during a TOC
reading.
Do not subject the disc to strong shocks during a
TOC reading.
Disc Full
There is not enough time to record on the disc.
Replace the disc with another recordable disc.
Temp Over
The temperature of the unit is too high.
Leave the unit in a cool place for a while before
operating it again.
The surrounding temperature is too high or too
low.
Operate the unit at moderate room temperature.
CautionI
The unit operates abnormally due to a scratched
disc or a strong shock.
Replace the disc. Do not subject the unit to a
strong shock.
PB DISC
A prerecorded disc is attempted to edit.
Replace the disc with a recordable one.
Protected
The disc is record-protected.
Slide the record-protect tab on the disc. (See page
16.) ,
TOC Full
There are too many tracks or emphasis data to be
recorded or edited, or there is no room on the
disc.
Erase tracks.
Mecha Err
Emergency
Error occurs in the loading mechanism.
(All functions will be disabled.)
Recording is no longer possible because there are
scratches on the disc or the unit was subjected to
a strong shock during recording.
Turn the power off and disconnect the AC cord
once. Then turn it on again.
If this message still appears, consult your local
Aiwa dealer.
Exchange the MD.
Do not subject the unit to strong shocks.
Can’t Copy
MD Error
UTOC Error
Recording is not possible due to SCMS (see page
13).
An error occurred in the MD unit of this unit.
An error occurred in the TOC of the MD because
the unit was subjected to a strong shock during
recording, or during recording or reading of the
TOC.
Contact an Aiwa service representative.
Exchange the MD.
Do not subject the unit to strong shocks during
recording, or during recording or reading of the
TOC.
30
ENGLISH