Aiwa Z-L31 - Manual (Page 21)

OTHER CONNECTIONS
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX IN JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/AUX IN R jack, and the white
plug to VIDEO/AUX IN L jack.
CDi DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
1-------nr
CD DIGITAL OUT
1 1
(OPTICAL)
POWER -4-^
VIDEO/AUX
IN lie&z:
To play equipment connected to VIDEO/AUX IN jaoks proceed
as follows.
1 Press VIDEO/AUX.
“VIDEO" appears on the display.
2 Play the connected equipment.
To change a source name on the display
When
VIDEO/AUX is pressed, “VIDEO” is displayed initially. It
can be changed to “AUX” or “TV”.
With the power on, press
POWER while pressing VIDEO/AUX.
Repeat the procedure to select one of the names.
Ill
mi
a
¡2
z
a
3
H
w
z
o
H
o
III
o
o
K
HI
X
H
o
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
ENGLISH
21