Tune – Aiwa Z-L31 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RADIO RECEPTION
■MONO
TUNER
■BAND
■SHIFT
To search for a station quickly (Auto Search)
Press
TUNER PRESET repeatedly to display “SEARCH” (auto
search
mode),
and
turn
MULTI
JOG
clockwise
or
counterclockwise until the frequency starts to change rapidly.
After tuning in to a station, the search stops.
SEARCH
FN 9 3 = = 0 y
To Stop the Auto Search manually, turn
MULTI JOG a little in
either direction.
• The Auto Search may not stop at the stations with very weak
signals.
• ◄◄ DOWN and ►►UP are also available to search for a
station. Keep
◄◄DOWN or ►►UP pressed until the tuner
starts searching. Press the button to stop the search manually.
1 PressTUNER/BAND to select the FM or AM band.
When
TUNER/BAND is pressed while the power is off, the
power is turned on directly (Direct Play Function).
To select a band with the remote control
Press
BAND while pressing SHIFT.
2 Press TUNER PRESET repeatedly to select the
manual tuning mode.
Each time the button is pressed, the following three tuning
modes are selected cyclically.
® Preset tuning mode: The preset number flashes.
(D
Auto search mode: “SEARCH” is displayed.
(D
Manual tuning mode: “SEARCH" is not displayed and
the preset number does not flash.
Frequency
SEARCH
: : ■■...■• :
|L—
When an FM stereo broadcast contains noise
Press
MONO TUNER on the remote control while pressing SHIFT
so that “MONO” appears on the display.
Noise is reduced, although reception is monaural.
MONO
J
ROCK
00'
To restore stereo reception, press
MONO TUNER on the remote
control while pressing
SHIFT so that “MONO” disappears.
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press
POWER while pressing ► on the unit.
To reset the interval, repeat this procedure.
NOTE
Preset number
The preset tuning mode is skipped if no station is preset.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
Turn MULTI JOG clockwise or counter-clockwise
to tune in to a station.
The frequency changes as you turn
MULTI JOG. When a
station is received, “TUNE” is displayed for 2 seconds.
During FM stereo reception, (d®!)) is displayed.
{|ias)i)
TUNE
■ DOWN and ►►UP are also available to tune in to a
station.
10
ENGLISH