Aiwa CSD-MD50 - Manual (Page 30)

SPECIFICATIONS
FM tuner section
Tuning range 87.5 MHz to 108 MHz
Antenna Rod antenna
AM tuner section
Tuning range 530 kHz to 1710 kHz (10 kHz
' step)
531 kHz to 1602 kHz (9 kHz step)
Antenna Loop antenna
CD player section
Scanning method Non-contact optical scanner
(semiconductor laser)
Frequency response 40 Hz to 20,000 Hz H dB
D/A converter 1 bit dual
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response 50 Hz to 12,500 Hz (normal tape)
Recording system AC bias
Heads Recording/playback head x 1,
Erase head x 1
MD recorder section
Scanning method Non-contact optical scanner
(Semiconductor laser application)
Recording system Magnetic polarity modulation
overwrite system
Rotation speed Approx. 400 - 900 rpm (CLV)
Sampling frequency 44.1 kHz
No. of channels Stereo: 2 channels
Monaural: 1 channel
A-D, D-A converter 1-bit
Frequency 20 - 20000 Hz -°i dB
Wow and flutter Unmeasurable
Generai
Speakers 80 mm cone type (2)
Output Headphones jack (stereo mini­
jack)
Power output 8 watts per channel
RMS at 6 ohms, form 200 Hz to
10 kHz, with no more than 10 %
Total Harmonic Distortion
Power requirements 120 VAC, 60 Hz
Power consumption 35 W
Dimensions 399 (W) X 252.5 (H) x 232 (D) mm
(15% x 10 X 974 inches)
Weight Approx. 6.2 kg (13 lbs 11 oz)
Accessories AC cord (1 )
Remote control (1)
AM antenna (1)
• Specifications and external appearance are subject to change
without notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radioATV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
US AND FOREIGN PATENTS LICENSED FROM DOLBY
LABORATORIES LICENSING CORPORATION.
3 0 ENGLISH