Canon IMAGEFORMULA DR-X10C - Manual (Page 27)

19
2
Basic Operation
2. Load your documents against the left feed guide.
3. Lock the left document guide (a) by pulling out the
lock lever, then slide the right document guide to the
right edge of your documents (b).
4. Lock the right document guide (a), and unlock the
left document guide (b).
5. Slide the left document guide to the left edge of your
documents.
■ Resetting the Document Guides
To reset the guides so that they are equidistant from the
center, perform the following procedure to spread the
guides to the left and right as far as they will go.
1. Confirm that the right document guide is locked (a),
and slide the left guide all the way to the left (b).
2. Lock the left document guide (a), and unlock the
right document guide (b).