Canon IMAGEFORMULA DR-X10C - Manual (Page 26)

18
■ Document Guides
Unlock the document guides by gently pressing both sides
of either guide (a), and sliding the document guides to
match the width of your document (b).
Hint
The positions of the left and right document guides can also be
locked independently for off-center loading. For details, see
“Adjusting the Document Guides” (p. 18) .
■ Document Feed Tray Extension
Pull out the tray extension as needed for the length of your
document.
Adjusting the Document Guides
The document guides normally extend at equal distances from
the left and right of the center of feeding so that your
documents are centered in the feed inlet.
However, each document guide has its own lock lever, so you
can load documents to the left or right of center by locking the
document guides at the appropriate positions.
■ Loading Documents at the Left Side
This example shows the procedure for loading documents
at the left side of the feeder.
1. Spread the document guides all the way to the left
and right.
Locking the Document Guides