ALESIS HR-16:B User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MMT-8 TROUBLESHOOTING CHART
SYMPTOM
WHAT'S PROBABLY WRONG
WHAT TO DO
No sound during
playback of recorded
parts.
Didn't record.
MIDI channels not properly
corresponding with sound sources.
Tracks are muted
Check MIDI connection.
Check MIDI channel
assignments.
Check track mute selection.
Won't record after touch MIDI filters for after touch
or system exclusive data, and system exclusive are enabled.
In MIDI filters mode, set after
touch and sys ex record to on.
Won't save or load to
tape
Bad connections.
Bad tape.
Level of sync tone is too high or low.
Errors in data.
Check wiring.
Use a certified data tape.
Try a higher or lower level to tape.
Re-save the data.
Won't sync to tape.
Bad connections.
Level on tape
Check cables.
Set level at or near 0 vu.
Turn off noise reduction
if possible.
If problems aren't solved after troubleshooting and refering to the manual, consult your Alesis dealer for
assistance.