ALESIS HR-16:B User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MMT-8 QUICK BASIC SETUP

Connect the MIDI OUT of the keyboard to the MIDI IN of ttie MMT-8.

. Connect the MIDI IN of the keyboard to the MIDI OUT of the MMT-8.

3. Connect the audio output of the keyboard to the audio input of a suitable monitoring system

(amplifier, mixer, stereo system).

These are three basic setups. A singie keyboard is connected to the MMT-8. in fig. 2 and 3 the

MMT-8 and HR-16 are setup with a single keyboard and the MMT-8 is providing the master
timina siqnai. Make sure that the MIDI OUT or THRU is connected to the MIDI IN propwly in

every MIDI connection. Also, turn on MIDI ECHO (Red LED lit) so that MIDI information wil pass
thru the MMT-8. Add more keyboards / sound generators by connecting the MIDI THRU from

either the keyboard or the HR-16 to the MIDI IN on the keyboard / sound generator, etc.

MIDI IN I MIDI OUT

—.................... —.... ..

MIDI IN

FIG. 1

MIDI OUT

-►

audio

OUT

Alesis

MMT.8 Instructions .

Page 3

This manual is related to the following products:

MMT-8