ALESIS HR-16:B - Manual (Page 28)

CLICK VALUE
The click value function Is used to set the metric value of the click (metronome)
The display looks like this:
10 CLICK VALUE:
1 /a
The possible values are the same as in quantize: 1/4, 1/6, 1/8, 1/12, 1/16,
1/24, 1/32, 1/48, 1/64, and OFF. The keypad and +/- arrow buttons are used
to change the value. The default is 1/8. If the CLICK value is set to OFF, it will
not click in either RECORD or PLAY.
CLICK IN PLAY
The CLICK IN PLAY function is used to turn on or of the click while playing a
pattern or song. It does not effect the click in record. The display looks like this:
11 CLICK IN PLAY
ENABLE: QN
The +/- arrow buttons are used to turn this function on or off. The default is ON.
Manual Volce/Tune/MIx
In the "on" position, the currently selected assignments will be applied
globally (to all Patterns and Songs). In order to have Individual
Volce/Tune/MIx assignments per Pattern, this Midi utility must be turned "off"
12 MANUAL VOICE/
TUNE/MIX: OFF
The +/- arrow buttons are used to turn this function on or off.
so that the programmed settings can be used. The default Is OFF,
BUTTON DYNAMICS
The BUTTON DYNAMICS function Is used to select the response of the drum pads.
The display will look like this:
13 PAD DYNAMICS
LOUD RESPONSE
The +/- arrow buttons are used to select the pad dynamics choices. The choices
are LOUD, MEDIUM, SOFT, and FIXED 1 through FIXED 8. The first three choices
are 3 different loudness curves. In the FIXED 1 through 8 settings, the pads will
always play the same dynamics (1 through 8), regardless of how hard they are
Alesis HR-16 Instructions ..................................................................................................................................... Page 22