ALESIS HR-16:B - Manual (Page 48)

Copying a TRACK to another TRACK of the same PART
To copy a single track to another track of the same part number, press and hold COPY, and
select the source track. The selected track's LED will remain lit, and all the other track LEDs
will turn off. Now select the destination track. This track's LED will now flash, indicating that
it is the track to be copied to. Pressing the RECORD button initiates the copy, and copies
the source track to the destination track. If any information existed in the destination track,
it is erased.
Copying a TRACK to another TRACK of a different PART
To copy a single track of one part to a single track of another, press and hold COPY, select
the source track, select the destination part number, select the destination track, then
press RECORD. If the destination track is the same number as the source track, the
destination track button does not have to be selected before pressing RECORD.
Copying selected Information (notas, pitchbend, individual MIDI channel,
etc.)
In all of the above copy modes, the entire contents of a track or part are copied to the
destination. It is possible to copy selected information from one track or part to another by
using the page up and page down buttons to select the desired data while holding the
COPY button. These buttons can be selected any time during the copy selection before
RECORD is pressed. They will scroll backwards and forwards through 22 choices with the
following displays:
COPY ONLY NOTES
FROM 01 TO fit
COPY PITCHBEND
FROM 01 TO at
COPY AFTERTOUCH
FROM 01 TOfll
COPY CONTROLERS
FROM 01 TO at
COPY PROG CHNGE
FROM 01 TO at
COPY SYSTEM EX.
FROM 01 TO 01
COPY MIDI CH.1
FROM 01 TOgl
COPY MIDI CH. 2
FROM 01 TOfll
thru channel 16
Alesis MMT-8 Instructions ..................................................................................................................................... Page 12