Tape – ALESIS HR-16:B User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The 10 click value choices are 1/2, 1/4, 1/6, 1/8, 1/12, 1/16, 1/24, 1/32, 1/48, 1/64. The
•I-/*
buttons of the keypad can be used to scroll through the choices. The keypad buttons
0-9 can also be used to select the click value directly, with
Q=V2
and 9*1/64. Additional
click pages can be accessed with the page up and page down buttons. Pressing the page
up button once moves the cursor to the RECORD CLICK function, as follows:
CLICK
VALUE
1/16
RECORD CLICK QN
This function determines whether or not the metronome will click while in record mode.
The default setting is ON, but it can be changed with the + and - buttons. The next page
has two more click parameters which are accessed with the page up and page down
buttons. They display as follows:
PLAY
CLICK
QJFF
COUNTDOWN: 04
The top function determines whether or not the metronome will click while in PLAY
modes. The + and - buttons can be used to change the function on or off, respectively.
The default setting Is PLAY CLICK OFF. The last function determines the number of clicks
that will be counted down when entering record. It can be set from 0 (OFF) to 99. The
default is 4.
TAPE
The TAPE button is used to access the tape interface features of the MMT-8. This allows
the user to save and retrieve sequence data with an ordinary cassette recorder. Pressing
and holding the TAPE button results in the following display:
SAVE ALL PARTS &
SONGS TO TAPE
Pressing the RECORD button initiates the save to tape. Both buttons can now be
released, since this operation may take over two minutes, during which the display will
read:
SAVING TO TAPE..
PART: 00
The display shows the current part or song being output. This display will advance until all
data is output. Pressing the STOP button will abort the operation. Before pressing
RECORD, the page up and page down buttons can be used to access the other five tape
pages. They are as follows:
CHECK TAPE DATA
FOR ERRORS
LOAD ALL PARTS &
SONGS FROM TAPE
LOAD ONE PART
FROM TAPE: flO
Alesis MMT-8 Instructions ..................................................................................................................................... Page 25