Adding an event – ALESIS HR-16:B User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
to scroll the data through the display until the end Is reached. The display includes the
beat, sub-beat, and any system exclusive data, as follows:
Û01/00: SYS EXCL
126 125 124>
OOl/flO: SYS EXCL
126 125 124>
001/00: SYS EXCL
126 125 124>
001/00: SYS EXCL
126 125 124>
001/00: SYS EXCL
126 125 124>
001/00: SYS EXCL
<123 122 121>
001/00: SYS EXCL
<123 122 121>
etc.
Erasing an event
Any event being displayed can be erased by holding ERASE and pressing RECORD.
Erasing an event removes it from the track, but does not alter the timing of the track. For
example, removing a quarter note at the beginning of a track does not move everything
else fon/vard a quarter note.
Adding an event
An event can be added by using the COPY button. Pressing and holding COPY causes
the following display:
INSERT NOTE
AT 001/00
Pressing the RECORD button will Insert a note at the current beat location with a note
value of C3, a velocity of 64, and a duration of 1 beat. This note can then be edited as
described above to any desired value. If something other than a note is desired to be
inserted, the page up and page down buttons can be used to scroll through the other
choices before pressing RECORD:
INSERT PCH BEND
AT 001/00___________
INSERT AFT TOUCH
AT 001/00
INSERT CONTROLER
AT 001/00
AlesIs MMT-8 Instructions .