Bernina 740E User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Winding the bobbin
Open the bobbin winder cover. (1)
Place
empty
bobbin
on
spindle.
Movement of the needte is automati*
cally cut out. (2)
Take the thread from the spool
through the guide to the bobbin. (3/4)
Wind thread a lew times by hand
round the empty bobbin in a clock
wise direction. Press the foot control.
As soon as the bobbin is full, wirxing
will stop and the thread will be cut
automaticalty.
Remove
the
bobbin
and dose the boMxn winder case. (5)
24
This manual is related to the following products: