Bernina 740E - Manual (Page 15)

Attaching the presser foot holder
Raise the presser foot clamp "a".
Attach the presser foot holder V as
illustrated.
Attaching the presser foot
Lower the presser foot holder *a*until
the cut-out V is directly above the
pin -d". (2)
Raise the lever *e’.
Lower №e presser fool holder *a' and
The presser foot T will engage auto­
matically.
Removing the presser foot
Raise the presser foot. (3)
Raise the lever *e* and the foot disen­
gages.
Attaching the seam guide
Attach the seam guide 'g' in the slot
as iHustrated. Adjust according to
need for hems, pleats, etc (4)
Attentfon:
Turn power switch to ’0' when
carrying out any of the above
operations!
22