Bernina 740E - Manual (Page 11)

Connecting the machine to the power source
(MOIW 74061
Conned plug *A" and plug '6' to the
machine and plug 'C into the mams
socket. Turn on power switch *0“. {1)
This appliance has a polarued plug
(one blade wider than ihe other)
To reduce the nsk ol electric shock,
this plug is intended to lit in a polariz­
ed outlet only one way.
If the plug does not lit tulty in Ihe outlet,
reverse the plug
If it still does not fit, contact a qualified
electrician to install the proper outlet.
Oo not modify the plug m any way.
Caution; The Foot Controller Model
4C-337B is for using with
Sewing
Machine Model
740E.
Foot control
The speed of the machine can bo
regulated by applying pressure to the
fool control. (2)
Speed control
\UC69* J*0(i
The maximum speed of the machirve
can be reduced with the speed con­
trol knob "O*. (3)
The speed control function is particu-
larty useful for intricate work, e g
sewing corners, matching up pat
terns etc and is ideal lor beginners
> minimum
► ► maximum
Sewing light
740t)
Press pov/er switch ’A". Press light
switch 'B-. (4)
High power, high frequency
interference can cause variations in
the motor speed of up to 50%.
These will disappear however, as
soon as the interference stops.
14