Bernina 740E User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the bulb
Disconnect the machine trom the
power suppty by removing the plug
from the mains socketl
- Loosen screw X* on the back of
the head cover
- Remove the head cover "D“.
- Unscrew the bulb *E" and fit new
bulb.
Replace the head cover and tigh
ten screw.
Should there bo any problem, ask
your local dealer for advice.
16
This manual is related to the following products: