Aiwa XM-M25 - Manual (Page 21)

SPECIFICATION
—
I Speaker system
Main unit XR-M25
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
20W + 20W(1kHz,T.H.D. 10%,
6 ohms)
0.08 % (10.5 W, 1 kHz, 6 ohms)
VIDEO/AUX: 0.4 V
MIC: 1.8 mV (10 kohms)
SUPER WOOFER: 1.0 V
SPEAKERS: accept speakers of
6 ohms or more
PHONES (stereo minijack):
accepts headphones of 32 ohms
4 tracks, 2 channels stereo
Cr02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000 Hz
50 dB (CrOa tape peak level
above 1 kHz)
AC bias
Recording/playback head x 1
Erase head x 1
Compact disc piayer section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
Semiconductor laser (X = 780 nm)
1 bit dual
75 dB (1 kHz, 0 dB)
0.1% (1 kHz, OdB)
Unmeasurable
AC : 120 V, 60 Hz
50 W
173x255.2x248.8 mm
(67s X lOVs X 97
b in)
3.65 kg
(8 lbs loz)
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
2 way, bass reflex (magnetic
shield type)
Woofer:
120 mm (4^/4 in) cone type
Tweeter:
20 mm (’Vi6 in) ceramic type
6 ohms
87 dB/W/m
155 X 253 x 220 mm
(6Vs x 10 X
8 V 4 in)
2.6 kg
(5 lbs 12 oz)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits tor a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not instaiied and used in accordance with the
instructions, may cause harmful interference to radio communi­
cations. However, there is no guarantee that interference wiii not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
.J
•4
K
lU
X
LJ
(9
ENGLISH
20