Garmin eTrex Legend H - Manual (Page 41)

eTrex Legend H and eTrex Vista H Owner’s Manual
Main Pages
Sight ‘N Go Navigation
Sight ‘N Go navigation is
available only on the Vista H with
electronic compass.
To use Sight ‘N Go to
navigate:
1. Press MENU > Sight ‘N Go to
start the feature. The compass
ring with pointer is in-line with
the two white sighting marks,
one at the base of the screen
and one at the top of the
screen.
2. Hold the unit at eye level and
line up the two sighting marks
with the distant object. Press
the ROCKER to lock the
direction.
3. Select Set Course .
4. Begin traveling to your
destination on a course line
using the course pointer as a
guide.
OR
Select Project Waypoint .
5. Enter an estimated distance
from your current location to
establish a projected waypoint
location.
6. Select Go To to open the Map
page and begin navigation
to the projected waypoint.
The Compass page shows a
bearing pointer for guidance.
Using the Course or
Bearing Pointer
The bearing pointer and
course pointer are independent
of each other. The bearing
pointer indicates the direction