Nespresso Citiz & Co EF 488 - Manual (Page 75)

Citiz service manual 75
R E P A I R S
8.5.5 Replacing power cord
• Remove 2 insulated faston receptacles (55) from mains switch (54).
• If present, disconnect ground wire (15, part of thermoblock assembly).
• Unlatch cable bracket (56) with screwdriver.
Use a pair of flat pli­
ers to pull off insulat­
ing sleeve with recep­
tacle.
The counterpart, a
flat receptacle, has a
special connector
latching (see detail). Press
down lever at first, then pull
off receptacle.
The cable bracket is
under tension. There­
fore, hold the cable
bracket with your finger
when unlatching it.