Nespresso Citiz & Co EF 488 - Manual (Page 115)

Citiz service manual 115
R E P A I R S
3. Use a screwdriver to release 4 latches.
4. Open closing handle.
5. Lift and remove cover (2).
Assembly checkpoints
• Check if damper (10) for closing handle is installed on cover (2).
• For correct layout of the wires to the coffee button prints, see “Replacing electronic
control board with button prints” on page 116.
• Assemble left side panel (3) first.
• Insert right side panel (4) into hinges at the top of the left side panel. Then fold down
right side panel and click latches.
• Check that all latches are engaged.