Nespresso Citiz & Co EF 488 - Manual (Page 36)

Citiz service manual 36
O P E R A T I O N
5.4 Program/reset fill up level
Each coffee button can be programmed with a coffee volume for an individual cup size.
The procedure for programming/resetting is the same for both coffee buttons.
5.4.1 Programming the fill up level
Programmable volume range .......................................................................... 10­750 ml
5.4.2 Resetting the fill up level
With the following procedure all programmed fill up levels will be set back to this factory
settings:
Coffee button "small cup" ....................................................................................... 40 ml
Coffee button "large cup" ..................................................................................... 110 ml
Each new program­
ming cycle starts with
the min. volume
(10 ml after 3 sec), regard­
less of a preprogrammed
coffee volume.
1) Prepare coffee as usual (see user
manual), but keep the coffee button
pressed for at least 3 seconds in
order to start programming mode.
2) Only release the button when the
desired fill level is reached.
1) Switch off the coffee machine. 2) Press and hold the "large cup" button.
3) Switch on the coffee machine.
4) Release "large cup" button.