Nespresso Citiz & Co EF 488 - Manual (Page 74)

Citiz service manual 74
R E P A I R S
8.5.4 Replacing mains switch
• Remove 4 insulated faston receptacles from mains switch (54).
• Press blade of screwdriver between holder of mains switch and platform carefully.
Lift holder with screwdriver slightly. Then press holder with mains switch (54)
inwards till it can be removed.
Assembly checkpoints
• The mains switch holder (54) has a notch (see detail) to ensure a correct fitting posi­
tion.
• Use marked cable guides to lay wires.
• Check wiring of mains switch (see "Wiring diagrams ­ model Citiz & milk, EF 485/
486" on page 124 and following).
Use a pair of flat pli­
ers to pull off insulat­
ing sleeves with
receptacles.