Lubrication – Ariens 935000 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

LUBRICATION
FIGURE 25
GREASE FITTINGS
Each fitting should be wiped clean before and aft
lubrication.
Grease
each
fitting
every
50
hours
of
operation with Ariens Moly Lithium grease. Following is
a list of the grease fittings with reference numbers that
identify
each
location
on
the
corresponding
illustra
tions.
1. Right and Left Steering King Pins — Figure 25.
2.
Right and Left Front Wheels — Figure 25.
3.
Jackshaft Spindle Housing — Figures 25 & 27.
4.
Grease mower input (center) spindle.
5.
Transaxle
is
sealed
for
dirt-free
operation.
However, should repairs be needed, requiring ad
ditional
lubrication,
use
Ariens
Moly
Lithium
Grease, Part No. 1 50.
JACKSHAFT
SPINDLE
HOUSING
o
TRACTION DRIVE BELT
O
CTi
!r~] LJ
o
FIGURE 27
POINTS TO OIL - FIGURES 25, 26 & 27
1.
Periodically oil the lift point pivots, front axle
pivot, control linkage pivots and the shaft pivots
to insure long life and smooth operation of the
parts. See Figures 25 and 27.
2.
Lubricate
slide
for
shift
interlock
switch.
See
Figure 26.
IMPORTANT; KEEP GREASE AND OIL OFF THE BELTS
TO AVOID BELT SLIPPAGE AND DETERIORATION.
- 16