SINGER WSL2000 ATS (Part 1) User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12. DISENGAGING UPPER CUTTER
To lower the upper cutter, open the left
front cover and turn the cutter knob toward
you until the cutter is all the way in the
down position. BE SURE TO PUT CUTTER
BACK UP BEFORE SEWING.
13. EXCLUSIVE BUILT-IN THREAD CUTTER
The built-in scissor conveniently cuts your
thread tail simply by pressing down on the
lever as illustrated, then releasing to cut.
14. ADJUSTABLE FABRIC GUIDE
The adjustable seam guide can slide to the
left or right as needed to keep fabric straight
while serging seams.
15. WASTE TRAY
Place the large waste tray on the front of
your Superlock by hooking over the slot on
the right front cover and inserting the peg
on the left into the hole on the side cover,
as illustrated.