Inside corners, Machine settings, Fabric – SINGER WSL2000 ATS (Part 1) User Manual
Page 31: Tension settings, Serge, Sleeve placket
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSIDE CORNERS
Practice the inside corner technique for perfect inside corners or curves such as for
Christmas stockings, oven mitts or kick pleats on skirts.
Machine Settings
Stitch Length: 2.5 - 3
Stitch Width: 6
Fabric
Medium weight woven
(Cut a square out of one corner.)
Tension Settings
Normal
(LN) -4-
(RN) -4-
(UL) -4-
(LL) -4-
Serge
•Align the edge with the inside edge of cutter, with bulk of fabric to the left.
•Serge up to 1/2" from the inside corner.
•Careful! Your cutter is 1/2" in front of the needle so you must fold
fabric away from the cutter before the corner reaches it.
•Pull fabric into a straight line and align the unfolded edge against the
inside edge of the cutter. There will be some tucks in the edge.
These should lay flat after stitching.
•Continue to serge along the edge.
Sleeve Placket
•Cut a 2 1/2" slit in a second piece of fabric.
•Cut a strip of fabric 1" x 5*.
•Fold strip in half lengthwise, wrong sides together.
•Lay strip on slit right sides together.
•Using inside corner technique, stitch strip to opening forming a placket.
29