SINGER WSL2000 ATS (Part 1) User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING LOWER LOOPER
Bring the thread from the spool through thread guide back to front of the thread stand
under (1) and then, in order, through guides 2-4 as illustrated below and inside front
cover of your Superlock.
With the presser foot raised to release tension, lay thread between thread
tension discs. Be sure thread is seeded all the way into the tension discs.
Bring the lower looper to the far left position by turning the handwheel toward you.
Snap thread into thread guides A, B, and C (illustration 3), then hook the thread guide
onto the lower looper thread guide D (Figure 3).
Then move the lower looper slightly to the right by turning the handwheel toward you.
Thread the eye of the lower looper D (Illustration 3). You may wish to use the tweezers
provided.
Bring thread tail under foot and toward the back left corner of the Superlock.
15