SINGER WSL2000 ATS (Part 1) User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16. OILING
Lubrication is not required often for
this machine since the important parts are all
made of a special oil impregnated sintered
metal. You will want to occasionally put one
or two drops of oil on moving metal parts will
increase durability.
17. CLEANING
First disconnect machine from power supply
by removing plug from the electric outlet.
Open front cover and side cover (see pg. 3).
Using the brush provided, remove all the dust
and lint that has accumulated. Remember to
also clean between the cutters often.
18. STORAGE
When the machine is not in use, disconnect
it from the power supply by removing plug
from the electric outlet.
Using the vinyl cover provided, cover
your machine when not in use.
8