SINGER WSL2000 ATS (Part 1) - Manual (Page 14)

SECTION II - THREADING & TENSION
Preparation for Threading
Spool Holders
For large cones of thread, use the black plastic
cone holders. This will help hold the cone of
thread in place.
Spool Caps
When using small spools, remove the
plastic cone-spool holders (a drop of oil will
make the holder slide off easily), and place the
spool directly on the spool pin. Use the spool cap
to keep the spool in place and to prevent the
thread from catching on edges of the spool.
Spool Nets
Spools of specialty thread sometimes work loose
from the spool during sewing, causing tangling or
irregular thread feeding. To prevent this use the
spool net provided as shown.
Spool cap
Domestic cotton reel
Cone type thread
Extension plate
Cone holder
▼ .4'
Thread comes off the top
I
m
\
Spool
Net
Net
.Turn up
Spool
NOTE: Specialty threads, such as fine perle cotton. Designer 6 by YU®, Ribbon Flos^,
and Pearl Crown Rayon® by YU may be used in the loopers of your Superlock.
For successful stitching be sure these threads feed off their spools or skeins easily.
12